502
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_rfanalyzer.fm
RFANalyzer
RFANalyzer:MANual:UPLink[:MFRequency]
RFANalyzer:MANual:UPLink:FREQuency
Function The setting form of this command performs two functions: (1) sets the tune frequency of the test
set’s demodulation signal path, and (2) selects manual tune mode for the test set’s demodulation
signal path.
The query form of this command returns the tune frequency of the test set’s demodulation signal
path.
The tune mode for the test set’s demodulation path can be returned to auto using the
“RFANalyzer:CONTrol:UPLink:FREQuency:AUTO” command.
Setting Range: 292.5 MHz to 2700 MHz
Resolution: 0.1 Hz
Query Range: 292.5 MHz to 2700 MHz
*RST setting 896 MHz
Programming Example
OUTPUT 714;"RFANALYZER:MANUAL:UPLINK:MFREQUENCY 1955.030 MHZ"
!Enables manual control of the demodulation signal path tune frequency and sets the tune frequency
!to 1955.030 MHz.
Function Sets/queries the tune frequency of the test set’s demodulation signal path.
This setting is applied when manual mode is selected (see
“RFANalyzer:CONTrol:UPLink:FREQuency:AUTO” ).
Setting Range: 292.5 MHz to 2700 MHz
Resolution: 0.1 Hz
Query Range: 292.5 MHz to 2700 MHz
*RST setting 896 MHz
Programming Example
OUTPUT 714;"RFANALYZER:MANUAL:UPLINK:FREQUENCY 942.6 MHZ"
!Sets the test set’s demodulation signal path tune frequency to 942.6 MHz.
To Next Page
Loading...
Need help?
General
