EasyManua.ls Logo

Agilent Technologies 8960 Series - Page 523

Agilent Technologies 8960 Series
786 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
523
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_setup_cctphase.fm
SETup:CCTPhase
SETup:CCTPhase:TIMeout[:STIMe]
SETup:CCTPhase:TIMeout:STATe
SETup:CCTPhase:TIMeout:TIME
Function The setting form of this command performs two functions: (1) sets the code channel timing and
phase error measurements timeout (see Timeouts ) value, and (2) sets the code channel timing
and phase error measurements timeout STATe to 1 (on).
The query form returns the code channel timing and phase error measurements timeout value.
Setting Range: 0.1 to 999.9 seconds
Resolution: 0.1 second
Query Range: 0.1 to 999.9
*RST Setting 10 seconds, on
Programming Example
OUTPUT 714;"SETUP:CCTPHASE:TIMEOUT:STIME 5 S"
!Sets timeout state to ON and sets the timeout time to 5 seconds.
Function Sets/queries the code channel timing and phase error measurementss timeout (see Timeouts )
state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:CCTPHASE:TIMEOUT:STATE ON
!Sets the timeout state to ON.
Function Sets/queries the code channel timing and phase error measurements timeout (see Timeouts )
setting to be used when the timeout state is set to ON.
Setting Range: 0.1 to 999.9 seconds
Resolution: 0.1 second
Query Range: 0.1 to 999.9
*RST Setting 10 seconds
Programming Example
OUTPUT 714;"SETUP:CCTPHASE:TIMEOUT:TIME 5 S"
!Sets the timeout time to five seconds.

Table of Contents

Other manuals for Agilent Technologies 8960 Series

Related product manuals