Agilent Technologies 8960 Series

543
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_setup_fm.fm
SETup:FM
SETup:FM:DETector[:TYPE]
SETup:FM:DISTortion:FREQuency
SETup:FM:DISTortion:STATe
SETup:FM:EXPandor:STATe
Function Sets/queries the detector type for FM measurements.
Setting Range: RMS|PPEak|NPEak
Query Range: RMS|PPE|NPE
*RST setting RMS
Programming Example
10 OUTPUT 714;”SETUP:FM:DETECTOR:TYPE PEAK”
Function Sets/queries the FM distortion fundamental frequency.
Setting Range: 100 to 10000 Hz
Resolution: 1 Hz
Query Range: 100 to 10000 Hz
*RST setting 1004 Hz
Programming Example
10 OUTPUT 714;”SETUP:FM:DISTORTION:FREQUENCY 300HZ”
Function Sets/queries whether the FM distortion measurement is enabled.
Setting Range: 1|0N|0|OFF
Query Range: 1|0
*RST setting 0 (off)
Programming Example
10 OUTPUT 714;”SETUP:FM:SDISTORTION:STATE ON”
Function Sets/queries whether the expandor is enabled.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST setting 0 (off)
Programming Example
10 OUTPUT 714;”SETUP:FM:EXPANDOR:STATE ON”