548
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_setup_fstability.fm
SETup:FSTability
SETup:FSTability:COUNt:STATe
SETup:FSTability:TIMeout[:STIMe]
SETup:FSTability:TIMeout:STATe
Function Sets/queries the multi-measurement state of the frequency stability measurement.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:FSTABILITY:COUNT:STATE ON” !Turns on multi-measurements.
Function Sets/queries the frequency stability measurement’s timeout setting and automatically sets the
timeout state to ON.
Setting Range: 0.1 to 999 seconds
Resolution: 0.1 second
Query Range: 0.1 to 999
*RST Setting 10 seconds, on
Programming Example
OUTPUT 714;"SETUP:FSTABILITY:TIMEOUT:STIME 5S”
!Sets timeout state to ON and sets the timeout time to 5 seconds.
Function Sets/queries the frequency stability measurement’s timeout state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:FSTABILITY:TIMEOUT:STATE ON”
To Next Page
Loading...
