Agilent Technologies 8960 Series Reference Guide

723
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_fixed_timer.fm
Fixed Timer Messages
T313 Connect acknowledge timer Time the network waits after transmitting a
CONNECT message until receiving the
CONNECT ACKNOWLEDGE message
before performing clearing procedures with
the MS.
10 seconds
T323 Modify complete timer Time the network waits after sending a
MODIFY message during call mode
changes, until receiving a MODIFY
COMPLETE or MODIFY REJECT message
before initiating call clearing procedures.
10 seconds
T3101 Immediate assignment timer Time the network waits after sending the
IMMEDIATE ASSIGNMENT or
IMMEDIATE ASSIGNMENT EXTENDED
message until the main signalling link is
established before releasing the newly
allocated channels.
1 second
T3103 Handover timer Time the network waits after transmitting a
HANDOVER COMMAND message until
receiving HANDOVER COMPLETE or
HANDOVER FAILURE or the MS
re-establishes the call before the old
channels are released. If the timer expires
and the network has not received a correctly
decoded L2 (format A or B) or TCH frame,
then the newly allocated channels are
released.
2 seconds
T3105 Physical information repetition timer Time the network waits after sending the
PHYSICAL INFORMATION message until
receiving a correctly decoded L2 (format A
or B) or TCH frame. This occur before
re-transmitting the PHYSICAL
INFORMATION message or releasing the
newly allocated channels.
50 ms
T3107 Channel assignment timer Time the network waits after transmitting
an ASSIGNMENT COMMAND message
until receiving the ASSESSMENT
FAILURE message or the MS re-establishes
the call before releasing the old and the new
channels.
3 seconds
T3109 Signalling disconnection timer Time the network waits after sending the
CHANNEL RELEASE message before
disconnecting the signalling link.
5 seconds
T3111 Channel deactivation after
disconnection timer
Time the network waits after disconnecting
the signalling link before deactivating the
channel.
500 ms
Timer Name Description Value

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English