EasyManua.ls Logo

Agilent Technologies 8960 Series

Agilent Technologies 8960 Series
786 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
724
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_fixed_timer.fm
Fixed Timer Messages
T3113 Paging timer Time the network waits after transmitting
the PAGING REQUEST message until
receiving the PAGING RESPONSE
message. This occurs before re-transmitting
the PAGING REQUEST (if the maximum
number of re-transmissions have not been
exceeded).
5 seconds
T3212 Location update timer The location update timer is set to zero,
periodic location update by the MS are
disabled. If the MS camps to the BCH and
decodes a new MCC or MNC from the one it
last camped on, it should perform a location
update.
zero = infinite time
T3250 TMSI reallocation timer Time the network waits after sending the
TMSI REALLOCATION COMMAND until
receiving TMSI REALLOCATION
COMPLETE. This occurs before aborting
the procedure and releasing the Radio
Resource connection.
5 seconds
T3260 Authentication response timer Time the network waits after an
AUTHENTICATION REQUEST until
receiving AUTHENTICATION RESPONSE.
This occurs before aborting the procedure
and releasing the Radio Resource
connection.
5 seconds
Timer Name Description Value

Table of Contents

Other manuals for Agilent Technologies 8960 Series

Related product manuals