725
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_mui.fm
Manual User Error Messages
Manual User Error Messages
Description
These messages are intended to be displayed on the manual user interface only, and are not entered into the
Error/Event Queue.
Error Message Description
The function you requested is not yet available. The test set does not have this capability.
IQ Calibration completed successfully for modulator <N> <N> is the IQ modulator number that you are
attempting to calibrate, <N> is 1 or 2.
IQ Calibration failed for modulator <N> <N> is the IQ modulator number that you are
attempting to calibrate, <N> is 1 or 2.
The function you requested is not available in this TA. This function is used in another Test Application.
IQ Calibration for modulator 1 in progress (10 minutes). Call
processing disabled.
This error is cleared by either the; IQ Calibration
completed successfully for modulator <N>, or IQ
Calibration failed for modulator <N>.
IQ Calibration for modulator 2 in progress (6 minutes). Call
processing disabled.
This error is cleared by either the; IQ Calibration
completed successfully for modulator <N>, or IQ
Calibration failed for modulator <N>.
Instrument warning: Audio generator instrument has been
closed.
The audio generator instrument was closed
automatically by the test set.
Measurement warning: Audio Analyzer instrument has been
closed.
The audio analyzer instrument was closed
automatically by the test set.
Measurement warning: Analog audio measurement has been
closed.
Analog audio measurements have been closed by
the test set.
Protocol warning: Setting change has terminated the link
with the DUT
Some setting change has caused the call to
disconnect.
Warning; Call processing disabled The call processing functions are not active
because the test set is performing calibration
operations.
IQ first modulator calibration X% IQ modulator calibration in progress, X represents
the percent complete.
IQ second modulator calibration X% IQ modulator calibration in progress, X represents
the percent complete.
To Next Page
Loading...
Need help?
General
