728
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_neg300.fm
-300 through -399 Error Message Descriptions
-361 Parity error in program message Parity bit not correct when data received for example,
on a serial port.
-362 Framing error in program message A stop bit was not detected when data was received for
example, on a serial port (for example, a baud rate
mismatch).
-363 Input buffer overrun Software or hardware input buffer on serial port
overflows with data caused by improper or nonexistent
pacing.
Error Message Description
To Next Page
Loading...
