438 Chapter 13
Setting and Using the Control and Management Functions
Configuring the Network
Step 6. The Identification Changes dialog box (Figure 13-15) appears. Enter the computer name in
the Computer Name box (1 in Figure 13-15).
Figure 13-15 Identification Changes dialog box
Step 7. The Network Identification dialog box (Figure 13-16) appears. Click the OK button.
Figure 13-16 Network Identification dialog box
Step 8. In the Identification Changes dialog box, click the OK button (2 in Figure 13-15).
Step 9. In the System Properties dialog box, click the OK button (2 in Figure 13-14).
Step 10. The System Settings Change dialog box (Figure 13-17) appears. Click the Yes button to
restart the E5070B/E5071B.
Figure 13-17 System Settings Change dialog box
NOTE Until the E5070B/E5071B is restarted, changed setting does not take effect.
To Next Page
Loading...
