Appendix C 637
List of Default Values
List of Default Values, Save/Recall Settings, and Backup Settings
C. List of Default Values
Search Range
Search Range OFF ← ← √ K/C
Start 0.0000 Hz ← ← √ K/C
Stop 0.0000 Hz ← ← √ K/C
Couple ON ← ← √ K/C
Bandwidth OFF ← ← √ K/C
Bandwidth Value -3.0000 dB
(When one of the marker is on)
← ← √ K/C
Discrete OFF ← ← √ K/C
Couple ON ← ← √ K/C
Marker Table OFF ← ← √ K/C
Statistics OFF ← ← √ K/C
Annotation Options
Marker Info X Pos 1 % ← ← √ K/C
Marker Info Y Pos 1 % ← ← √ K/C
Align ON ← ← √ K/C
Active Only ON ← ← √ K/C
Fixture Simulator
Fixture Simulator OFF ← ← √ K/C
Topology
Device SE-BAL ← ← √ K/C
Port1 (se) 1
(When SE-Bal is selected as the
device)
(When SE-SE-Bal is selected as the
device)
← ← √ K/C
Port1 (bal) 1-2
(When Bal-Bal is selected as the
device)
← ← √ K/C
Port2 (bal) 2-3 (SE-Bal is selected as the device)
3-4 (Bal-Bal is selected as the
device)
← ← √ K/C
Port2 (se) 2
(When SE-SE-Bal is selected as the
device)
← ← √ K/C
Port3 (bal) 3-4
(When SE-SE-Bal is selected as the
device)
← ← √ K/C
Property OFF ← ← √ K/C
Key Operation Factory-shipped Setting Default Value Save/
Recall
Backup Available
Means of
Defining a
Setting
*RST
To Next Page
Loading...
