Appendix D 711
Softkey Functions
Save/Recall Menu
D. Softkey Functions
(Continued)
Save SnP Displays softkeys to save measurement data into Touchstone format file.
SnP Format Displays softkeys to select data format of a file in which data is saved.
Auto Selects data format for the active channel’s display format. If the display format
does not correspond to data format of the Touchstone file, “real number -
imaginary number format “ is selected.
:MMEM:STOR:SNP:FORM
AUTO
LinMag/Angle Selects “linear magnitude format” as data format.
:MMEM:STOR:SNP:FORM
MA
LogMag/Angle Selects “log magnitude format” as data format.
:MMEM:STOR:SNP:FORM
DB
Real/Imaginary Selects “real number - imaginary number format” as data format.
:MMEM:STOR:SNP:FORM RI
s1p Displays softkeys to save data to a Touchstone file with s1p file type.
1 Saves measurement data of test port 1 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S1
P 1
:MMEM:STOR:SNP
2 Saves measurement data of test port 2 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S1
P 2
:MMEM:STOR:SNP
3 Saves measurement data of test port 3 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S1
P 3
:MMEM:STOR:SNP
4 Saves measurement data of test port 4 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S1
P 4
:MMEM:STOR:SNP
s2p Displays softkeys to save data to a Touchstone file with s2p file type.
1-2 Saves measurement data of test port 1 and 2 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S2
P 1,2
:MMEM:STOR:SNP
1-3 Saves measurement data of test port 1 and 3 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S2
P 1,3
:MMEM:STOR:SNP
1-4 Saves measurement data of test port 1 and 4 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S2
P 1,4
:MMEM:STOR:SNP
2-3 Saves measurement data of test port 2 and 3 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S2
P 2,3
:MMEM:STOR:SNP
2-4 Saves measurement data of test port 2 and 4 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S2
P 2,4
:MMEM:STOR:SNP
3-4 Saves measurement data of test port 3 and 4 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S2
P 3,4
:MMEM:STOR:SNP
s3p Displays softkeys to save data to a Touchstone file with s3p file type.
1-2-3 Saves measurement data of test port 1, 2, and 3 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S3
P 1,2,3
:MMEM:STOR:SNP
1-2-4 Saves measurement data of test port 1, 2, and 4 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S3
P 1,2,4
:MMEM:STOR:SNP
1-3-4 Saves measurement data of test port 1, 3, and 4 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S3
P 1,3,4
:MMEM:STOR:SNP
2-3-4 Saves measurement data of test port 2, 3, and 4 to a Touchstone file.
:MMEM:STOR:SNP:TYPE:S3
P 2,3,4
:MMEM:STOR:SNP
Key Operation Function SCPI Command
To Next Page
Loading...
