Appendix D 717
Softkey Functions
Sweep Setup Menu
D. Softkey Functions
(Continued)
Frequency Offset
External Source
Offset
Set the offset for the base frequency
*2
.
:SENS{1-16}:OFFS:LOC:OFFS
Start Set the start frequency.
:SENS{1-16}:OFFS:LOC:STAR
Stop Set the stop frequency.
:SENS{1-16}:OFFS:LOC:STOP
Control Turns on/off of the external signal source control with GPIB.
:SENS{1-16}:OFFS:LOC:CONT
Power Set the power level.
:SENS{1-16}:OFFS:LOC:POW
Slope [xdB/GHz] Set the power slope.
:SENS{1-16}:OFFS:LOC:POW:SLOP
Slope [ON/OFF] Turns on/off of the power slope.
:SENS{1-16}:OFFS:LOC:POW:SLOP
:STAT
Return Returns to the softkey display screen one level higher.
Avoid Spurious Turns on/off of the avoid spurious.
:SENS{1-16}:OFFS:ASP
X-Axis Displays the softkey to select the x-axis frequency data.
Base
Selects base frequency
*2
when the frequency offset turns on.
:CALC{1-16}:OFFS:XAX
Stimulus Selects source port frequency when the frequency offset turns on.
:CALC{1-16}:OFFS:XAX
Response Selects receiver port frequency when the frequency offset turns on.
:CALC{1-16}:OFFS:XAX
Normal
Selects base frequency
*2
when the frequency offset turns off.
:CALC{1-16}:MIX:XAX
RF + LO Selects RF+LO frequency when the frequency offset turns off.
:CALC{1-16}:MIX:XAX
RF - LO Selects RF-LO frequency when the frequency offset turns off.
:CALC{1-16}:MIX:XAX
LO - RF Selects LO-RF frequency when the frequency offset turns off.
:CALC{1-16}:MIX:XAX
Cancel Returns to the softkey display screen one level higher.
Return Returns to the softkey display screen one level higher.
Return Returns to the “E5070B/E5071B Menu (Top Menu)” on page 646.
*1.Only with Options 214, 314, and 414.
*2.The base frequency is the frequency that is set by using and keys.
Key Operation Function SCPI Command
To Next Page
Loading...
