Ashida ADR233B - Page 18

ADR233B
Doc ID : ADR233B/IM/01
Ref ID : ADR233B/IM/ToC
Rev No. : 05
Page No. : 18 of 479
8.4.6.5 CB Data 293
8.4.6.5.1 To View – CB Data 293
8.4.6.6 Alarm Record 294
8.4.6.6.1 To View – Alarm Record 294
8.4.7 SYSTEM CONFIG 295
8.4.7.1 CT/VT Ratios – System Config 295
8.4.8 PROTECTIONS 298
8.4.9 CLEAR RECORDS 302
8.4.9.1 Clear Records 302
8.4.10 OUTPUT & LED TEST 304
8.4.10.1 Output & LED Test 304
8.4.11 Group 1 306
8.4.11.1 Group 1 – Menu List 306
8.4.11.2 Equipment Data 309
8.4.11.3 Ph Differential 313
8.4.11.3.1 Ph Differential (If Disabled) 313
8.4.11.3.2 Ph Differential (If Enabled) 314
8.4.11.4 REF 319
8.4.11.4.1 REF (If Disabled) 319
8.4.11.4.2 REF (If LowZ) 320
8.4.11.4.3 REF (If HighZ) 322
8.4.11.5 Phase OC 324
8.4.11.5.1 W1 Phase OC (IF Disabled) 324
8.4.11.5.2 W1 Phase OC (If IEC/ UK Curve is selected) 326
8.4.11.5.3 W1 Phase OC (If IEEE / US Curve is selected) 329
8.4.11.5.4 W1 Phase OC (If Definite Time is selected) 332
8.4.11.6 Ground OC 335
8.4.11.6.1 Ground OC (If Disabled) 335
8.4.11.6.2 Ground OC (If IEC Curve is selected) 336
8.4.11.6.3 Ground OC (If IEEE / US Curve is selected) 339
8.4.11.6.4 Ground OC (If Definite Time is selected) 342
8.4.11.7 Residual OC 345
8.4.11.7.1 W1 Residual OC (If Disabled) 345
8.4.11.7.2 W1 Residual OC (If IEC Curve is selected) 347
8.4.11.7.3 Residual OC (If IEEE / US Curve is selected) 350