Ashida ADR233B - Page 264

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 264 of 479
ADR233B
Setting Group
G2
Enabled
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the G2 can be set i.e. Disabled / Enabled /
TimeEnabled.
Note: When set as Enabled
Press the Minus / Down arrow key (- /) to move to the next
option.
Setting Group
G3
Enabled
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the G3 can be set i.e. Disabled / Enabled /
TimeEnabled.
Note: When set as Enabled
Press the Minus / Down arrow key (- /) to move to the next
option.
Setting Group
G4
Enabled
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the G4 can be set i.e. Disabled / Enabled /
TimeEnabled.
Note: When set as Enabled
Press the Right arrow key () to move to the next option.
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Press the Left arrow key () to SAVE the changes.
SAVE SETTINGS
This window will flash for a moment and it will move to the
Main Menu.
MEASURMENTS
GLOBAL

CB CONTOL
REPORTING