Ashida ADR233B - Page 267

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 267 of 479
ADR233B
Setting Group
G3
TimeEnabled
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the G3 can be set i.e. Disabled / Enabled /
TimeEnabled.
Note: When set as TimeEnabled
Press the Minus / Down arrow key (- /) to move to the next
option.
Setting Group
GroupChange Delay
5.0 s
Range 0 – 400 s
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Groupchange Delay can be set.
The setting range is from 0 to 400s in step of 0.1s.
Press the Minus / Down arrow key (- /) to move to the next
option.
Setting Group
G4
TimeEnabled
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the G4 can be set i.e. Disabled / Enabled /
TimeEnabled.
Note: When set as TimeEnabled
Press the Minus / Down arrow key (- /) to move to the next
option.
Setting Group
GroupChange Delay
5.0 s
Range 0 – 400 s
Editable setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Groupchange Delay can be set.
The setting range is from 0 to 400s in step of 0.1s.
Press the Right arrow key () to move to the next option.
Press

Key
For SAVE
Press Target Reset
Key For Cancel
Press the Left arrow key () to SAVE the changes.