Ashida ADR233B - Page 308

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 308 of 479
ADR233B
Sequence OC
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select Sequence OC.
Password protected window for “Sequence OC” setting i.e.
W1 Sequence OC (Seq. I>1 Enable, Seq. I>2 Enable and
Seq. I>3 Enable) and W2 Sequence OC (Seq. I>1 Enable,
Seq. I>2 Enable and Seq. I>3 Enable) can be set as Disabled
/ +Seq / -Seq
Press the Minus / Down arrow key (- /) to move to the next
option.
Under Voltage
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select Under Voltage.
Password protected window for “Under Voltage” setting i.e.
Under Voltage SET Disabled/ Enabled, V< and tV<Delay.
Press the Minus / Down arrow key (- /) to move to the next
option.
Over Voltage
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select Over Voltage.
Password protected window for “Over Voltage” setting i.e.
Over Voltage SET Disabled/ Enabled, V> and tV>Delay.
Press the Minus / Down arrow key (- /) to move to the next
option.
V/Hz Protection
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) select V/Hz Protection.
Password protected window for “V/Hz Protection” setting i.e.
V/Hz-1 Protection, V/Hz-2 Protection, V/Hz-3 Protection,
V/Hz-4 Protection, V/Hz-5 Protection and V/Hz-6 Protection
can be set as Disabled/Enabled.
Press the Minus / Down arrow key (- /) to move to the next
option.