Ashida ADR233B - Page 386

ADR233B
Doc ID : ADR233B_IM_01
Ref ID : ADR233B/IM/FC
Rev No. : 05
Page No. : 386 of 479
Contents
9 Flow Chart Overview 388
9.1 Main Menu 388
9.2 EDIT and SAVE settings 389
9.3 Measurement 390
9.3.1 To View – Measurement 1 390
9.3.2 To View – Measurement 2 392
9.4 Global 393
9.4.1 General Settings 394
9.4.2 Settings Group 395
9.4.2.1 Setting Group (If Disabled / Enabled) 395
9.4.2.2 Setting Group (If TimeEnabled) 396
9.4.3 Port F 397
9.4.4 Port 1 398
9.4.5 Port R 399
9.4.6 IRIG Port (Optional) 400
9.4.7 Disturbance 401
9.4.8 Display Contrast 402
9.4.9 Date And Time 403
9.4.9.1 Date And Time (If Disabled) 403
9.4.9.2 Date And Time (If Enabled) 404
9.5 CB Control 405
9.5.1 CB Control (If Disabled) 405
9.5.2 CB Control (If Enabled) 406
9.6 Reporting 407
9.6.1 Event – Reporting 408
9.6.2 Status – Reporting 409
9.6.2.1 Status – Reporting (Modular) 409
9.6.2.2 Status – Reporting (Enhance) 410
9.6.2.3 Status – Reporting (Basic) 411
9.6.3 Fault Record – Reporting 412
9.6.4 Error Log – Reporting 413
9.6.5 CB Data – Reporting 414
9.6.6 Alarm Record – Reporting 415
9.7 System Config 416
9.7.1 CT/VT RATIO –System Config 416
9.8 Protection 417
9.9 Clear Records 418
9.10 Output & LED Test 419
9.11 Group 1 420
9.11.1 Equipment Data 421
9.11.2 Ph Differential 422
9.11.2.1 Ph Differential (If Disabled) 422
9.11.2.2 Ph Differential (If Enabled) 423
9.11.3 REF 424
9.11.3.1 REF (If Disabled) 424
9.11.3.2 REF (If LowZ) 425
9.11.3.3 REF (If HighZ) 426