ADR233B
Ref ID : ADR233B/IM/FC
Rev No. : 05
Page No. : 387 of 479
9.11.4 Phase OC 427
9.11.4.1 W1 Phase OC (If Disabled) 427
9.11.4.2 W1 Phase OC (IEC Curve) 428
9.11.4.3 W1 Phase OC (IEEE / US Curve) 429
9.11.4.4 W1 Phase OC (Definite Time Curve) 430
9.11.5 Ground OC 431
9.11.5.1 Ground OC (If Disabled) 431
9.11.5.2 Ground OC ( IEC Curve ) 432
9.11.5.3 Ground OC ( IEEE / US Curve ) 433
9.11.5.4 Ground OC ( Definite Time Curve ) 434
9.11.6 Residual OC 435
9.11.6.1 W1 Residual OC (If Disabled) 435
9.11.6.2 W1 Residual OC ( IEC Curve ) 436
9.11.6.3 W1 Residual OC ( IEEE / US Curve ) 437
9.11.6.4 W1 Residual OC ( Definite Time Curve ) 438
9.11.7 Sequence OC 439
9.11.7.1 W1 Sequence OC (If Disabled) 439
9.11.7.2 W1 Sequence OC ( IEC Curve ) 440
9.11.7.3 W1 Sequence OC ( IEEE / US Curve ) 441
9.11.7.4 W1 Sequence OC ( Definite Time Curve ) 442
9.11.8 Under Voltage (27) 443
9.11.8.1 Under Voltage (27) (If Disabled) 443
9.11.8.2 Under Voltage (27) (If Enabled) 444
9.11.9 Over Voltage (59) 445
9.11.9.1 Over Voltage (59) (If Disabled) 445
9.11.9.2 Over Voltage (59) (If Enabled) 446
9.11.10 V/Hz Protection 447
9.11.10.1 V/Hz Protection (If Disabled) 447
9.11.10.2 V/Hz Protection (If Enabled) 448
9.11.11 Breaker Failure 449
9.11.11.1 W1 50 BF (If Disabled) 449
9.11.11.2 W1 50 BF (If Enabled) 450
9.11.12 Thermal Overload 451
9.11.12.1 Thermal Overload (If Disabled) 451
9.11.12.2 Thermal Overload (If Enabled) 452
9.11.13 Through Fault 453
9.11.13.1 Through Fault (If Disabled) 453
9.11.13.2 Through Fault (If Enabled) 454
9.12 Active Group 455
To Next Page
Loading...
