Maintenance-Object Repair Procedures
555-233-143
8-934 Issue 1 May 2002
System Technician-Demanded Tests:
Descriptions and Error Codes
Investigate tests in the order they are presented in Table 8-360. By clearing error
codes associated with the Control Channel Loop test, for example, you may also
clear errors generated from other tests in the testing sequence.
Table 8-360. System Technician-Demanded Tests
Order of Investigation
Short Test
Sequence
Long Test
Sequence
Reset
Board
Sequence D/ND
1
1. D = Destructive; ND = Nondestructive
Control Channel Loop test (#52) X X ND
SAKI Sanity test (#53) X X D
IP Address query (#1371) X X D
NIC Query test (#1383) X X ND
Local Ping test (#1379) X X ND
MP Diagnostic test (#1406) X X D
Short IP 2-Way Transmission test
(#1505)
XND
Long IP 2-Way Transmission test
(#1506)
XND
To Next Page
Loading...
