Maintenance-Object Repair Procedures
555-233-143
8-1044 Issue 1 May 2002
Cabinet Configuration
Because of overheating, the TN802 circuit pack should not be placed directly
above or below another MAPD circuit pack.
UPS Protection
An uninterruptible power supply (UPS) protection is strongly recommended for an
PN containing a TN802 circuit pack.
Faceplate
Figure 8-55 shows the TN802 faceplate.
Figure 8-55. TN802 faceplate
Figure Notes:
1. LCD display (see Table 8-416 on
page 8-1045)
2. Reset button (recessed)
3. Red board-status LED
4. PCMCIA card slot
5. Amber PCMCIA disk-in-use LED
1
2
3
4
5
fpdfmapd KLC 030899
To Next Page
Loading...
