Avaya S8700 - Page 376

Maintenance Commands
555-233-143
7-120 Issue 1 May 2002
Table 7-16 lists the event type, the text that appears in the Event Description
field, a further explanation of the condition, and the type of data in the
Event 1
and
Event 2 fields.
Table 7-16. Denied IP events
Event
Type Event Description Explanation
Event
Data 1
Event
Data 2
1907 IP RRJ-Invalid RAS
addr
Registration Rejected because the
RAS address in the RRQ is
invalid.
0 IP address
that sent the
RRQ
1908 IP RRJ-Invld call
SigAddr
IP Registration Rejection because
signaling address in the RRQ is
invalid.
0 IP address
1909 IP RRJ-RemoteOfc
misadmin
Registration rejected because:
1. Remote Office is enabled on
the Signaling Group screen,
but the RRQ is not from a
supported Remote Office
product.
2. The RRQ is from a supported
Remote Office product, but
Remote Office not enabled on
the Signaling Group screen.
3. Remote Office is enabled on
the Signaling Group screen,
but the Terminal Type in the
RRQ is not valid.
0 IP address
1910 IP RRJ-H323
UserObj undef
Registration rejected because
there is no H323 User Object.
0 IP address
1911 IP RRJ-Exceed max
endpts
Registration rejected because the
capacity for either registered
endpoints or Remote Office
endpoints is exceeded. Check
maximum allowed in the system
on page 1 of the System
Parameters Customer Options
screen.
0 1st part: #
of RO
stations;
2nd part: #
of IP
stations,
respectively
1912 IP RRJ-Exceed
ProdID/Ver
Registration rejected because the
maximum number of registered
endpoints of a specific product ID
and version is exceeded. Check
the limit on the System
Parameters Customer Options
screen.
T/S: IP
Product
from the
System
Parameters
Customer
Options
screen
1st part:
registered
limit; 2nd
part: actual
count,
respectively
Continued on next page