Avaya S8700 - Page 860

Maintenance-Object Repair Procedures
555-233-143
8-138 Issue 1 May 2002
System Technician-Demanded Tests:
Descriptions and Error Codes
Always investigate tests in the order presented in the table below. For example,
by clearing error codes associated with the CAMA (Channel Administration
Memory Array) test (#205), you may also clear errors generated from other tests
in the testing sequence.
Channel Administration Memory Array (CAMA)
Test (#205)
This test is a memory device that stores information used to control the 140AY
device. The Angel asynchronously feeds the CAMA with the control information.
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/ND
1
1. D = Destructive; ND = Nondestructive
Channel Administration Memory Array (CAMA) test (#205) X ND
Playback Speech Memory Array (PSMA) test (#206) X X ND
140AY Channel Sanity Inquiry test (#222) X X ND
Table 8-53. Test #205 CAMA (Channel Administration Memory Array)
Test
Error
Code
Tes t
Result Description / Recommendation
1000 ABORT System resources required to run test are not available. The port may be
active on a valid call.
1. If the circuit pack is idle, retry the command at 1-minute intervals up to 5
times.
2000 ABORT Response to the test request was not received within the allowable time period.
See ‘‘Announcement Board Locked Condition’’.
2100 ABORT Could not allocate the necessary system resources to run this test.
ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
Continued on next page