Avaya S8700 - Page 938

Maintenance-Object Repair Procedures
555-233-143
8-216 Issue 1 May 2002
17 Loss of frame
18 Multiplexer Section Alarm indication signal error
19 Multiplexer Section remote defect indicator error
20 Loss of pointer
21 Path signal level mismatch
22 High level path alarm indication signal
23 High level path remote defect indicator
24 Loss of cell delineation
25 Uncorrectable headers sent by the ATM switch
26 Too many cells with invalid Virtual Path Indicator (VPI)/Virtual Circuit
Indicator (VCI) combination
27 The signaling link between the board and the ATM switch is down.
28 Board to the ATM switch connection is down
34 Excessive AAL-5 (ATM signaling protocol) retransmission requests
35 Excessive LAP-D retransmission requests
37 ATM CLP (cell loss priority) bit – see MO ‘‘ATM-NTWK (ATM Network
Error)’’
38 ATM congestion indicator – see MO ‘‘ATM-NTWK (ATM Network
Error)’’
39 ATM cell underrun – see MO ‘‘ATM-NTWK (ATM Network Error)’’
40 ATM cell overrun – see MO ‘‘ATM-NTWK (ATM Network Error)’’
41 Lost ATM cells – see MO ‘‘ATM-NTWK (ATM Network Error)’’
Table 8-90. XXYY Error Codes for Test #1259
(ATM Board Error Query Test) — Continued
XX Aux Data Description
Continued on next page