100-412-234 REV. 06 155
6.12 System Information
You can view information from the System Information screen about the current setup of
your System. This screen should be available whenever you are calling Branson for
troubleshooting help.
Software upgrade can be performed from this screen.
Figure 6.44 System Information
Table 6.28 System Information
Item Description
PS Life
Counter for the lifetime number of cycles that have been processed
through the power supply.
Gen Alarm
Counter for the lifetime number of alarms that have been addressed
on the power supply.
Calibration Indicates either Pass, Fail, or Factory.
P/S Analog or Digital.
Actuator Displays the actuator type.
S/W Version Displays the power supply software version number.
P/S Assembly Displays the power supply assembly number.
Actuator
Assembly #
Displays the actuator assembly number.
Cyl Stroke
Displays the maximum cylinder stroke for all standard diameter
cylinders.
Stack Assembly
#
Displays the stack assembly number.
SBC Version
Displays the software version of the Single Board Computer that
controls the display.
To Next Page
Loading...
