Branson 2000Xc - Figure 6.67 Delete Data; Figure 6.68 Streaming Data Setup

176 100-412-234 REV. 06
A message will let the user know whether the requested data has been successfully copied
or not. A Supervisor or Executive user can delete the Weld History and Event History data
from the power supply after the data has been successfully copied to the USB stick. You
need to confirm the action two times before deleting the data from the power supply.
Figure 6.67 Delete Data
6.20.2 Streaming Data Setup
Use this to select which data will be automatically saved to a USB stick and how often the
data will be saved.
Figure 6.68 Streaming Data Setup