Branson 2000Xc - Models Covered; Figure 2.1 Left Side View of the 2000 Xc Actuator

16 100-412-234 REV. 06
2.1 Models Covered
This manual provides detailed instructions for installation, setup, operation, and
maintenance of the 2000Xc Power Supply.
The 2000Xc Actuator may be found in one of two configurations:
• An actuator on a column support, column and ergonomic base, also called a stand on base (as
seen on
Figure 2.1)
• An actuator alone (not installed on a column support, and so on). These are often used in custom
systems that provide a means of positioning the actuator
The figure below shows a Branson 2000Xc Actuator mounted on a column support which,
in turn is mounted on a column, and is supported by the ergonomic base.
Figure 2.1 Left Side View of the 2000Xc Actuator