100-412-234 REV. 06 181
6.23.2 Password Recovery
In the event an Executive level user cannot log into the system, the PRK (Password
Recovery Kit) can be used to disable the Authority Check and recover the Executive user’s
password and ID. The PRK is a dongle that plugs into the back of the 2000Xc power
supply. It can be ordered from Branson. EDP number is 101-063-1089.
• Power down the 2000Xc power supply
• Plug the PRK into the I/O connector located in the back of the power supply
• Power up the 2000Xc power supply
• The Authority check is now set to No and users are not restricted by authority levels or
passwords
• Navigate to the System Configuration/User ID table to Enable a user Executive account and view
the user ID and password
• Set Authority Check back to Yes
• Unplug the PRK, power down
To Next Page
Loading...
