208 100-412-234 REV. 06
8.7.3.1 Performing a Cold Start
Select Diagnostics from the Main Menu. Press the Cold Start button to initiate the Cold
Start. The screen will return to Weld Setup when the Cold Start is complete.
Refer to 6.14 Diagnostics menu for additional information about Cold Start.
NOTICE
Using the Cold Start procedures will erase the current preset and
some of the Setup parameters in the System Configuration menu. Be
sure you have a record of your setup if you want to retain it. Your
settings can be saved to a preset.
To Next Page
Loading...
