Canon iPF6400S - Page 631

Item Details Default Setting
Secondary DNS Server Address Specify the IP address of the secondary DNS server. ::
Use the same host name and domain
name as IPv4
Activate when using the same DNS host and domain names as
for IPv4.
Off
DNS Host Name Specify the printer host name, up to 63 characters (1–63 charac-
ters). Use single-byte letters, numbers, and - (hyphens). Do not
use numbers or - for the first character or - for the last character.
NB-18GBip6xxxxxx
DNS Domain Name Specify the printer domain name, up to 63 characters. Use sin-
gle-byte letters, numbers, - (hyphens), and . (periods). Do not
use numbers, -, or . for the first character, or - or . for the last
character.
blank
Perform dynamic updating of stateful
addresses
Activate this setting to automatically register the stateful address
with the DNS server.
Off
Dynamically update the stateless ad-
dress
Activate this setting to automatically register the stateless ad-
dress with the DNS server.
Off
Dynamically update the manual ad-
dress
Activate this setting to automatically register the manual address
with the DNS server.
Off
7 Click OK to display the Network page.
Note
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers and DNS
domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain Name, respective-
ly.
iPF6400S Configuring the Printer's TCP/IP Network Settings With RemoteUI
User's Guide
Network Setting Initial Settings
631