Cisco Aironet Wave 2 - Show Boot

show boot
To show boot attributes, use the show boot command.
show boot
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view boot attributes:
cisco-wave2-ap# show boot
BOOT path-list: part2
Console Baudrate: 9600
Enable Break: yes
Manual Boot: no
Memory Debug: no
Crashkernel:
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
89
show Commands
show boot