Cisco Aironet Wave 2 User Manual

show processes memory
To display the processes on the access point, use the show processes memory command.
show processes memory {maps |smaps} pid pid-number
Syntax Description
Displays maps for the processesmaps
Displays smaps for the processessmaps
Process ID that you have to specifypid
pid-number
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the list of processes utilizing the memory on the access
point:
cisco-wave2-ap# show processes memory
Mem total:1030608 anon:23876 map:11424 free:712728
slab:132748 buf:0 cache:88284 dirty:0 write:0
Swap total:0 free:0
PID VSZ^VSZRW RSS (SHR) DIRTY (SHR) STACK COMMAND
6227 56500 53464 1168 732 1144 732 132 /usr/sbin/mrvlfwd
6283 27536 20668 13032 2400 13032 2400 132 /usr/sbin/capwapd
6297 24880 10612 14536 1376 14536 1376 132 wcpd
6255 9612 6600 1508 1052 1508 1052 132 /usr/sbin/cleanaird
5122 9556 4144 2664 2012 2664 2012 132 /usr/bin/capwap_brain
29097 7148 1536 3560 2392 3556 2388 132 /usr/sbin/cisco_shell
3142 6828 1216 2992 2264 2992 2264 132 /usr/sbin/cisco_shell
5106 4588 404 1912 1644 1912 1644 132 /usr/bin/fastcgi -s /tmp/fcgi_sock
5108 4588 404 1912 1644 1912 1644 132 /usr/bin/slowfcgi -s /tmp/slow_fcgi_sock
6084 4544 452 928 360 928 360 132 /usr/sbin/lighttpd -f /etc/lighttpd.conf
6214 3692 344 1420 960 1420 960 132 tamd_proc ap-tam 1 0 -debug err
6213 3556 340 1460 1104 1460 1104 132 tams_proc -debug err
6133 3396 400 1196 976 1196 976 132 /usr/bin/poder_agent
4689 3176 336 1012 812 1012 812 132 /usr/bin/sync_log /storage/syslogs/13
6143 3140 304 1428 1204 1428 1204 132 /usr/bin/failover
4716 3136 284 616 436 616 436 132 watchdogd
6121 3116 280 988 820 988 820 132 bigacl_d
5084 3112 272 952 804 952 804 132 /usr/bin/led_core
6181 1884 320 1044 260 1044 260 132 perl /usr/bin/drt.pl
1 1596 196 492 412 492 412 132 init
30914 1596 196 428 344 428 344 132 top -m -b -n 1
6145 1596 196 248 176 248 176 132 {S80cisco} /bin/sh /etc/init.d/S80cisco
start
30912 1592 192 424 356 424 356 132 {show_process_me} /bin/ash
/usr/bin/cli_scripts/show_process_memory.sh 0 0 0 0 0 0 0 0 0 0
30911 1592 192 400 336 400 336 132 /bin/sh -c
/usr/bin/cli_scripts/show_process_memory.sh 0 0 0 0 0 0 0 0 0 0 | more
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
124
show Commands
show processes memory

Cisco Aironet Wave 2 Specifications

General

Category	Wireless Access Point
Wireless Standard	802.11ac Wave 2
Model	Aironet Wave 2
Frequency Bands	2.4 GHz, 5 GHz
Maximum Data Rate	1.7 Gbps
MIMO Technology	MU-MIMO
MIMO	4x4:4
Power over Ethernet	Yes (802.3af/at)
Security	WPA2, WPA3, 802.1X, AES, TKIP
Management	Cisco DNA Center, Cisco Prime Infrastructure, WebUI, CLI
Operating Temperature	0 to 40°C (32 to 104°F)
Mounting	Ceiling, wall, pole