Cisco Aironet Wave 2 - Capwap Ap Restart

capwap ap restart
To restart the CAPWAP protocol, use the capwap ap restart command.
capwap ap restart
Syntax Description
Restart the CAPWAP
protocol
restart
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to restart CAPWAP protocol:
cisco-wave2-ap# capwap ap restart
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
18
capwap Commands
capwap ap restart