Cisco Aironet Wave 2 User Manual

capwap ap auth-token
To configure authentication token, use the capwap ap auth-token command.
capwap ap auth-token ssc-token
Syntax Description
SSC token; valid range is 8 to 32 characters
ssc-token
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to configure authentication token,:
cisco-wave2-ap# capwap ap auth-token myauthtoken
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
11
capwap Commands
capwap ap auth-token

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English