Cisco Aironet Wave 2 - debug wips

debug wips
To enable wIPS debugging, use the debug wips command.
debug wips {errors | events | critical}
Syntax Description
Enable wIPS error level debuggingerrors
Enable wIPS event level debuggingevents
Enable wIPS critical level debuggingcritical
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to enable wIPS error level debugging:
cisco-wave2-ap# debug wips errors
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
71
debug Commands
debug wips