Cisco Aironet Wave 2 User Manual

enable
To turn on privileged commands, use the enable command.
enable
Command Modes
User EXEC (>)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to turn on privileged commands:
cisco-wave2-ap> enable
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
147
System Management Commands
enable

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English