show inventory
To view the physical inventory, use the show inventory command.
show inventory
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the physical inventory:
cisco-wave2-ap# show inventory
NAME: AP2800, DESCR: Cisco Aironet 2800 Series (IEEE 802.11ac) Access Point
PID: AIR-AP2802I-D-K9 , VID: V01, SN: XXXXXXXXXXX
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
116
show Commands
show inventory
To Next Page
Loading...
