show dhcp
To view the status of Dynamic Host Configuration Protocol (DHCP), use the show dhcp command.
show dhcp {lease | servers}
Syntax Description
Displays the DHCP addresses leased from a serverlease
Displays the known DHCP serversservers
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the status of DHCP addresses leased from a server:
cisco-wave2-ap# show dhcp lease
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
106
show Commands
show dhcp
To Next Page
Loading...
