Cisco Aironet Wave 2 - clear cts

clear cts
To clear the statistics of Cisco TrustSec Security, use the clear cts command.
clear cts role-based counters [all | client mac-addr | from sgt to dgt]
Syntax Description
Clears Cisco TrustSec summary counterscounters
Clears all Cisco TrustSec countersall
Clears the Cisco TrustSec counters for a client MAC address specified in
xx:xx:xx:xx:xx:xx format
client mac-addr
Specifies the source group tag for filtered trafficfrom
Security Group Tag (SGT); valid values are 0 to 65535
sgt
Specifies the destination group tag for filtered trafficto
Destination Group Tag (DGT); valid values are 0 to 65535
dgt
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
This example shows you how to clear all the statistics of Cisco TrustSec Security counters:
cisco-wave2-ap# clear cts role-based counters all
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
22
clear Commands
clear cts