Cisco Aironet Wave 2 - debug memory pool free

debug memory pool free
To debug memory pool free calls, use the debug memory pool free command.
debug memory pool free {all | name pool-name} {diff | realtime interval 1-1000000-seconds
| start}
Syntax Description
Configures debug for all memory pool free callsall
Configures debug for a specific memory pool's free call
name pool-name
Shows memory pool debug free call difference in detaildiff
Configures realtime interval for the memory pool free calls
realtime interval 1-1000000-seconds
Starts the debug for the memory pool free callsstart
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to configure the start of the debugging of all memory pool free
calls:
cisco-wave2-ap# debug memory pool free all start
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
64
debug Commands
debug memory pool free