Cisco Aironet Wave 2 - logging

logging
To log commands, use the logging command.
logging {console [disable] | host {clear | disable | enable}}
Syntax Description
Console loggingconsole
Configure syslog serverhost
Disable syslog host
logging
disable
Enable syslog serverenable
Clear syslog server IPclear
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to enable console logging:
cisco-wave2-ap# logging console
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
149
System Management Commands
logging