Cisco Aironet Wave 2 - show cdp

show cdp
To display CDP options, use the show cdp command.
show cdp {entry device device-name |inline_power |interface |neighbors |traffic}
Syntax Description
Information for specific neighbor entry whose name you must enter
entry device device-name
Inline power negotiation informationinline_power
CDP interface status and configurationinterface
CDP neighbor entriesneighbors
CDP statisticstraffic
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view information for a specific neighbor entry:
cisco-wave2-ap# show cdp entry device mydevice
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
94
show Commands
show cdp