Cisco Aironet Wave 2 - capwap ap lag

capwap ap lag
To configure CAPWAP lag, use the capwap ap lag command.
capwap ap lag {enable | disable}
Syntax Description
Enables
LAG
enable
Disables
LAG
disable
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to enable LAG on the AP:
cisco-wave2-ap# capwap ap lag enable
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
16
capwap Commands
capwap ap lag