Cisco Aironet Wave 2 - Debug Lldp

debug lldp
To debug LLDP, use the debug lldp command.
debug lldp {errors | events | packet}
Syntax Description
Debugs LLDP errorserrors
Debugs LLDP eventsevents
Debugs LLDP
packets
packet
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to enable debugging of LLDP errors:
cisco-wave2-ap# debug lldp errors
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
60
debug Commands
debug lldp