Cisco Aironet Wave 2 - clear datapath

clear datapath
To clear the datapath counters or drops, use the clear datapath command.
clear datapath {drops | statistics}
Syntax Description
Clears the datapath drop countersdrops
Clears the datapath countersstatistics
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
This example shows you how to clear the datapath drop counters:
cisco-wave2-ap# clear datapath drops
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
23
clear Commands
clear datapath