Cisco Aironet Wave 2 User Manual

capwap ap ip
To configure static IP address and DNS for the CAPWAP AP, use the capwap ap ip command.
capwap ap ip static-ip-addr static-netmask ip-addr-default-gateway [ip-addr-dns1 | ip-addr-dns2]
[domain-name]
Syntax Description
Static IP address of the AP
static-ip-addr
Static netmask
static-netmask
IP address of the default gateway
ip-addr-default-gateway
(Optional parameters) IP address(es) of the DNS
[ip-addr-dns1 | ip-addr-dns2]
(Optional parameter) Domain name
[domain-name]
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to configure static IP address and DNS for the CAPWAP AP:
cisco-wave2-ap# capwap ap ip 209.165.200.225 255.255.255.224 209.165.200.227 209.165.200.226
example.org
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
15
capwap Commands
capwap ap ip

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English