show interfaces wired
To view the wired interface, use the show interfaces wired command.
show interfaces wired wired-interface-number
Syntax Description
Wired interface number; valid range is between 0 to
3
wired-interface-number
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the wired interface whose number is 1:
cisco-wave2-ap# show interfaces wired 1
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
115
show Commands
show interfaces wired
To Next Page
Loading...
