Cisco Aironet Wave 2 - Config Boot Crashkernel

config boot crashkernel
To enable or disable kernel crash, use the config boot crashkernel command.
config boot crashkernel {enable | disable}
Syntax Description
Enables kernel crashenable
Disables kernel
crash
disable
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to enable kernel crash:
cisco-wave2-ap# config boot crashkernel enable
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
34
config Commands
config boot crashkernel