ap-type
To configure the AP type for an AP, use the ap-type command.
ap-type {capwap |mobility-express word}
Syntax Description
Enable the AP as CAPWAP AP typecapwap
Enable the AP as Mobility Express AP typemobility-express
Enter the TFTP transfer command details in following format:
tftp://<tftp-server-ip-address>/<filename with path from root>
word
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to configure the AP type to CAPWAP:
cisco-wave2-ap# ap-type capwap
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
142
System Management Commands
ap-type