Cisco Aironet Wave 2 User Manual

show controllers nss status
To display NSS information, use the show controllers nss status command.
show controllers nss status
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view NSS information:
cisco-wave2-ap# show controllers nss status
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
102
show Commands
show controllers nss status

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English