Cisco Aironet Wave 2 User Manual

show clock
To display the system clock, use the show clock command.
show clock
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the system clock:
cisco-wave2-ap# show clock
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
98
show Commands
show clock

Cisco Aironet Wave 2 Specifications

General

Category	Wireless Access Point
Wireless Standard	802.11ac Wave 2
Model	Aironet Wave 2
Frequency Bands	2.4 GHz, 5 GHz
Maximum Data Rate	1.7 Gbps
MIMO Technology	MU-MIMO
MIMO	4x4:4
Power over Ethernet	Yes (802.3af/at)
Security	WPA2, WPA3, 802.1X, AES, TKIP
Management	Cisco DNA Center, Cisco Prime Infrastructure, WebUI, CLI
Operating Temperature	0 to 40°C (32 to 104°F)
Mounting	Ceiling, wall, pole